2 KO 35/6-110 İki Pompalı Dik Milli Kullanma Suyu Hidroforu
4.058,54 USD
Category
Brand
Stock code
2ko356110
Manufacturing Period
24 Month
Price
4.058,54 USD
VERTICAL SHAFT MULTI-STAGE CENTRIFUGAL PUMP HYDROPHORE SETS (2 KO 35 SERIES) |  |
| Residence-apartment, commercial building (hotel, hospital, dormitory, school etc.) required in irrigation systems and agricultural applications Designed and manufactured to meet the need for pressurized water hydrophore systems. |  |
| GENERAL FEATURES |
- • Epoxy painted DKP control panel
- • Low current protection against dry operation
- • 2nd protection preventing operation without water (5 m level float)
- • Adjustable low and high current-voltage protection
- • Phase sequence and phase loss protection
- • Monitoring of pump ready circuit and error conditions on the screen
- • In case of failure, the error name can be read on the screen.
- • Sequential operation synchronous aging feature
- • Suction and discharge collector, manometer and pressure switch
- • Spring type silent stainless steel check valve
- • Steel chassis with rubber pads to prevent vibration and oven-painted paint
| STRUCTURAL FEATURES |
| Body and Shaft | Stainless steel |
| Fans and Diffusers | Norly |
| Mechanical Seal | Carbon / Ceramic / NBR |
| Input - Output Body | Cast Iron |
| TECHNICAL SPECIFICATIONS |
* CURVE VALID FOR A SINGLE PUMP.
| MODEL | ENGINE POWER HP | ENGINE POWER kW | RECOMMENDED TANK VOLUME |
| 2 KO 35/3-55 | 2x7.5 | 2x5.5 | 750LT - PN10 |
| 2 KO 35/4-75 | 2x10 | 2x7.5 | 750LT - PN10 |
| 2 KO 35/5-110 | 2x15 | 2x11 | 750LT - PN10 |
| 2 KO 35/6-110 | 2x15 | 2x11 | 750LT - PN16 |
| 2 KO 35/7-150 | 2x20 | 2x15 | 750LT - PN16 |
| 2 KO 35/8-150 | 2x20 | 2x15 | 750LT - PN16 |
| DIMENSIONS |
| MODEL | INLET - OUTLET DIAMETER | A | B | C | D | H |
| 2 KO 35/3-55 | 3"-21/2" | 670 | 780 | 468 | 190 | 880 |
| 2 KO 35/4-75 | 3"-21/2" | 670 | 780 | 514 | 190 | 925 |
| 2 KO 35/5-110 | 3"-21/2" | 650 | 750 | 559 | 185 | 1070 |
| 2 KO 35/6-110 | 3"-21/2" | 650 | 750 | 605 | 185 | 1115 |
| 2 KO 35/7-150 | 3"-21/2" | 650 | 750 | 651 | 185 | 1265 |
| 2 KO 35/8-150 | 3"-21/2" | 650 | 750 | 696 | 185 | 1310 |
| THINGS TO CONSIDER |
- Connection flex and balancing tank must be ordered separately.
- The stop pressure is minimum 1.5 bar above the start pressure.
- In order for the product to be covered by the warranty, the first start-up must be done by our authorized services.
- If the hydrophore will suction from minus elevation, please get information from our company.
Be the first to review this product!